{"id":3877,"date":"2026-09-09T13:25:07","date_gmt":"2026-09-09T07:55:07","guid":{"rendered":"https:\/\/www.goldmedalindia.com\/blog\/?p=3877"},"modified":"2026-09-09T13:25:07","modified_gmt":"2026-09-09T07:55:07","slug":"geyser-leakage-reasons-and-fixes","status":"publish","type":"post","link":"https:\/\/www.goldmedalindia.com\/blog\/geyser-leakage-reasons-and-fixes\/","title":{"rendered":"Geyser is Leaking? Know What could be the reason & its fixes"},"content":{"rendered":"

09th September 2026 | Written By: Rika Aash<\/a> | Read Time: 3min | Last Updated: 09th September 2026<\/em><\/p>\n

Leakage in a geyser is one of the most common issues that can occur during use and should never be ignored. A few drops of water may result from pressure release during heating. However, continuous leakage could indicate loose pipe connections, excessive pressure or an internal component that requires attention. Identifying the actual cause early can help prevent damage to the geyser, reduced efficiency and potential electrical hazards.
\n<\/span><\/p>\n

    \n
  1. \n

    Loose Inlet or Outlet Connections<\/h2>\n

    A loose connection at the water inlet or outlet pipe is one of the most common causes of geyser leakage. Regular use can cause fittings to loosen and seals to deteriorate over time, allowing water to escape.<\/p>\n

    How to Fix: Have the pipe connections and seals inspected by a qualified technician and tightened or replaced as required.<\/p>\n<\/li>\n

    <\/span><\/p>\n

  2. \n

    Leakage from the Safety Valve<\/h2>\n

    The safety valve is designed to release excess pressure that builds up inside the geyser. A small amount of dripping may occur during the heating cycle as the water expands. However, continuous or excessive leakage could indicate high water pressure or a faulty safety valve.<\/p>\n

    How to Fix: Get the water pressure and safety valve checked by an authorised service technician. Never block, seal or tamper with the safety valve, as it is an important safety component.<\/p>\n<\/li>\n

    <\/span><\/p>\n

  3. \n

    Excessive Water Pressure<\/h2>\n

    If the incoming water pressure exceeds the geyser\u2019s recommended range, it can put additional stress on internal components, valves and connections, potentially resulting in leakage.<\/p>\n

    How to Fix: Get a technician to check the incoming pressure and recommend the appropriate pressure-control solution where required.<\/p>\n<\/li>\n

    <\/span><\/p>\n

  4. \n

    Heating Element or Gasket Leakage<\/h2>\n

    The heating element is securely fitted inside the geyser with seals or gaskets to prevent water leakage. Over time, these seals may deteriorate or loosen, causing water to leak around the heating element assembly.<\/p>\n

    How to Fix: Switch off the geyser and have the gasket, flange and heating element inspected by a qualified technician. Any damaged seals should be replaced by trained service personnel.<\/p>\n<\/li>\n

    <\/span><\/p>\n

  5. \n

    Corrosion Inside the Tank<\/h2>\n

    Storage geysers are continuously exposed to water, and over time, ageing and inadequate maintenance can lead to corrosion of the inner tank. Rust marks, discoloured water or leakage from the geyser body may indicate tank deterioration.<\/p>\n

    How to Fix: Internal tank corrosion usually requires professional inspection. Depending on the extent of the damage, the geyser may need to be repaired or replaced.<\/p>\n<\/li>\n

    <\/span><\/p>\n

  6. \n

    Faulty Drain Valve<\/h2>\n

    Some storage geysers include a drain arrangement for servicing and maintenance. If the valve or its connection becomes loose or damaged, water may leak from the lower section of the unit.<\/p>\n

    How to Fix: Have the valve checked and replaced if necessary.<\/p>\n<\/li>\n<\/ol>\n

    <\/span><\/p>\n

    What Should You Do If Your Geyser Is Leaking?<\/h2>\n

    If you notice any leakage from your geyser, switch it off immediately and close the water inlet. Do not attempt to open the geyser, handle electrical components, or repair any internal parts yourself. Always contact an authorised technician or electrician to address the leakage. Additionally, regular servicing, correct installation, and periodic inspection of valves and connections can help maintain your geyser and extend its lifespan.<\/p>\n

    <\/span><\/p>\n

    Frequently Asked Questions (FAQs) :<\/h3>\n

    <\/span><\/p>\n